Annie 30
   HOME

TheInfoList



OR:

The Annie 30, often just called Annie, is an American
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminolo ...
that was designed by
Chuck Paine Chuck is a masculine given name or a nickname for Charles or Charlie. It may refer to: People Arts and entertainment * Chuck Alaimo, American saxophonist, leader of the Chuck Alaimo Quartet * Chuck Barris (1929–2017), American TV producer * ...
as an offshore cruiser and first built in 1980.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 206-207. Houghton Mifflin Company, 1994. The Annie design was later developed into the ''Annie 2'' by Paine and offered as plans for custom building or amateur construction.


Production

The design was built by
Morris Yachts Morris may refer to: Places Australia *St Morris, South Australia, place in South Australia Canada * Morris Township, Ontario, now part of the municipality of Morris-Turnberry * Rural Municipality of Morris, Manitoba ** Morris, Manitob ...
in Bass Harbor, Maine,
United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territori ...
. The company built 16 examples of the design, starting in 1980, but it is now out of production.


Design

The Annie is a recreational
keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...
, built predominantly of
fiberglass Fiberglass (American English) or fibreglass ( Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...
, with wood trim. It has a
masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, ...
rig, a spooned
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a sloped transom, a transom-hung and keel-mounted
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally air or water). On an aircraft the rudder is used primarily to counter adve ...
controlled by a
tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...
and a fixed long
keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...
, with the forefoot cutaway. It displaces . The boat has a draft of with the standard keel fitted. The boat is fitted with a Westerbeke two-cylinder
diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-ca ...
for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . The cabin has two design interior versions, both using
teak Teak (''Tectona grandis'') is a tropical hardwood tree species in the family Lamiaceae. It is a large, deciduous tree that occurs in mixed hardwood forests. ''Tectona grandis'' has small, fragrant white flowers arranged in dense clusters ( pan ...
trim. One has a forward head, just aft of the "V"-berth, while the other has an aft head, in place of the chart table and a dresser in the forward cabin. The forward cabin has a privacy curtain. The galley is located aft, on the starboard side, just ahead of the companionway stairs and has an optional two-burner stove. A shower is also optional and uses freshwater engine cooling to heat the water. Ventilation is via nine opening ports. The
genoa Genoa ( ; it, Genova ; lij, Zêna ). is the capital of the Italian region of Liguria and the sixth-largest city in Italy. In 2015, 594,733 people lived within the city's administrative limits. As of the 2011 Italian census, the Province of ...
has tracks and the
mainsheet traveler A traveller is a part of the rigging of a boat or ship that provides a moving attachment point for a rope, sail or yard to a fixed part of the vessel. It may take the form of anything from a simple ring on a metal bar or a spar to, especially in a ...
is mounted aft of the cockpit.


Operational history

In a review Richard Sherwood described the design, "Annie is a heavy-displacement boat, but she has a very tall rig and much greater sail area in the jib than older boats. In addition, freeboard is low, the bow is sharp, and the keel is quite narrow. The forefoot is cut away. With the long keel and the heavy displacement, Annie should track well. The tall rig will assist in light air."


See also

* List of sailing boat types *
Annie (sloop) ''Annie'' is a Sandbagger sloop located at Mystic Seaport in Mystic, Connecticut, United States. Built in 1880 in Mystic by David O. Richmond, ''Annie'' was built for Henry H. Tift and was used for competitive racing. ''Annie'' was donated to ...
- a historic boat with the same name Similar sailboats *
Alberg 30 The Alberg 30 is a Canadian sailboat, that was designed by Carl Alberg and first built in 1962. The Alberg 30 incorporates design elements from the similar Alberg Odyssey 30 of two years earlier. Production The boat was built by Whitby Boat ...
*
Alberg Odyssey 30 The Odyssey 30 is an American sailboat, that was designed by Carl Alberg and first built in 1960 in the San Francisco bay area. A total of 15 examples were completed. Many of the design elements of the Odyssey 30 were used in the Alberg 30 of ...
*
Aloha 30 The Aloha 30 is a Canadian sailboat, that was designed by Ron Holland and first built in 1986. Production The boat was built by Ouyang Boat Works under the Aloha Yachts brand in Canada between 1986 and 1989, but it is now out of production. ...
*
Bahama 30 The Bahama 30 is an American sailboat that was designed by Bob Finch as a cruiser and first built in 1973.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 210-211. Houghton Mifflin Company, 1994. T ...
*
Bristol 29.9 The Bristol 29.9 is an American sailboat that was designed by Halsey Chase Herreshoff as a Midget Offshore Racing Class and International Offshore Rule racer and first built in 1977.Sherwood, Richard M.: ''A Field Guide to Sailboats of North ...
*
C&C 30 The C&C 30 is a series of Canadian and American sailboats, that was first built in 1973. The C&C 30 molds are thought to have been used to create the Lancer 29 Mark III and the Lancer 30 Mark II in 1977. Production The initial models were ...
*
C&C 30 Redwing The C&C Redwing 30, also called the C&C 30 Redwing, Redwing 30 or just the Redwing, is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1967. Production Cuthbertson & Cassian designed the boat for Hinterhoell ...
*
Catalina 30 The Catalina 30 is a series of American sailboats, that were designed by Frank Butler and later by Gerry Douglas. The Catalina 30 design was replaced in the company's line by the Catalina 309 in 2010. Production The boat was built by Catal ...
* Catalina 309 *
CS 30 The CS 30 is a Canadian sailboat, that was designed by Tony Castro and first built in 1984. The design is out of production. Production The boat was built by Canadian Sailcraft in Canada. It became their most successful model, with 90 built ...
* Grampian 30 *
Hunter 30 The Hunter 30 is an American sailboat that was designed by John Cherubini as a cruising boat and first built in 1973. The boat was also supplied as an unfinished kit for amateur completion as the Quest 30. The Hunter 30 was the first design ...
*
Hunter 30T The Hunter 30T is an American sailboat that was first built in 1991. The Hunter 30T is a development of the 1988 Hunter 30-2 design. The design was originally marketed by the manufacturer as the Hunter 30, but is now usually referred to as th ...
*
Hunter 30-2 The Hunter 30-2 is an American sailboat, that was built by Hunter Marine in the United States between 1988 and 1992. The boat was sold under the name ''Hunter 30'', but because the company has sold four designs under that name, this design ha ...
*
Hunter 306 The Hunter 306 is an American sailboat design, that was introduced in 2001. The design forms a scaled series with the Hunter 326 and the 356. Production The design was built by Hunter Marine in the United States, starting in 2001, but it is ...
*
Kirby 30 The Kirby 30 is a Canadian racing sailboat, that was designed by Bruce Kirby and first built in 1981. The Kirby 30 design was a follow-on to the Kirby 25 and it was later developed into the Mirage 30 SX in 1985. Production The boat was buil ...
* Leigh 30 *
Mirage 30 The Mirage 30 is a Canadian sailboat, that was designed by Americans, American Robert Perry (yacht designer), Robert Perry and first built in 1983. The design is out of production. The boat was built by Mirage Yachts in Canada. The Mirage 30 ...
*
Mirage 30 SX The Mirage 30 SX is a Canadian sailboat, that was designed by Bruce Kirby as a racer and first built in 1985. The Mirage 30 SX design is not related to the Mirage 30, but is instead a lightweight development of the Kirby 30, with a deeper el ...
*
Nonsuch 30 The Nonsuch 30 is a Canadian sailboat that was designed by Mark Ellis and first built in 1978. It was the first the series of Nonsuch sailboats and was scaled upwards and down, to form a complete line of boats, from the Nonsuch 22 to the N ...
* O'Day 30 *
Pearson 303 The Pearson 303 is an American sailboat that was designed by William Shaw as a cruiser and first built in 1983.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 226-227. Houghton Mifflin Company, 1994 ...
*
S2 9.2 The S2 9.2 is an American sailboat that was designed by Arthur Edmunds as a Cruising (maritime), cruiser and first built in 1977.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 216-217. Houghton Miff ...
*
Seafarer 30 The Seafarer 30, also known as the Seafarer Swiftsure 30, is an American sailboat that was designed by McCurdy & Rhodes as a Cruising (maritime), cruiser-Sailing (sport), racer and first built in 1978.Sherwood, Richard M.: ''A Field Guide to Sa ...
* Southern Cross 28 *
Tanzer 31 The Tanzer 31 is a Canadian sailboat, that was designed by George Cuthbertson of Cuthbertson & Cassian and first built in 1984. The design is out of production. Production Production of the boat was commenced in 1984 by Tanzer Industries of ...


References

{{Reflist Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Chuck Paine Sailboat types built by Morris Yachts